SINGLE-AXLE SPREADER MS 120
The MS 120 is equipped with large-volume tires as standard, which means that it is very easy to pull and very gentle to the soil. Through the high-quality and robust wear- and drive parts, the MS 120 is an extreme powerful machine, that is also able to spread very low application rates.
- Steel side walls 3 mm thick, 1,250 mm high, slanted at the top, smooth on the inside, welded on the outside,
- Grille and rubber sealing in the front wall
- Hydraulically-actuated, swivel-mounted rear hood
- Two conveyors with four round steel chains 14 x 50 mm (breaking load 4 x 24 t)
- Steel floor
- Gearbox with hydr. motor for forward and reverse of scraper floor
- Two beater rotors with an outer diameter of 650 mm. Spreader aggregate passage 1,500 mm
- 1 ¼ “ roller chain to drive the lower beater rollers
- 2-disc spreader with a disc diameter 1,000 mm / 4 distribution vanes on each
- Disc gearing with shaft Ø 60 mm / overload protection / freewheel drive mechanism, spreading unit protected by 8 mm thick HARDOX wear plates
- Walterscheid drive shaft PWE 580 with cam clutch and freewheel drive mechanism to protect the powertrain and beater rollers
- Overload clutch to protect the disc spreading aggregate
- Freewheeling between the spreader plate transmissions
- If equipped with electrical control system: Speed monitoring of the beater rotors. The bottom chain is stopped when rotor beater speed is < 140 rpm.
| Article no. | Article |
|---|---|
| E22015 | Slurry gate 1,500 mm with mechanic indicator of opening width at front wall |
| E22031 | Spreading cover, hydraulic, on left side |
| E22035 | Spreading cover, hydraulic, on right side |
| E22060 | Duplex roller chain for drive of beater rotor |
| E22070 | Working light LED, each |
| E22040 | Plastic ledge on top of side walls |
| E22050 | Plastic sheet inside of rear hood |
| E24200 | Warning light package Position light red/white, sidelights yellow, warning beacon yellow |
| Article no. | Article |
|---|---|
| E99902 | Walterscheid drive shaft PWE 580 with cam clutch |
| E24010 | Electrical operation of endless floor with safety shutdown |
| E24020 | Electrical operation of endless floor, slurry gate and rear hood with safety shutdown |
| E24040 | Additional function for 24020: Electrical operation for spreading cover |
| E24100 | Operating hour counter for electrical operation |
| E24110 | Load counter |
| E24105 | Job calculator with cable harness (prerequisite item 24020) |
| E24106 | ISO BUS terminal |
| E24108 | CAN BUS module (if equipped with items 24105 + 20071) |
| E24120 | Dosage valve with a sensor for digital opening display |
| E24400 | Automatic lubrication of the roller chain on the spreading aggregate |
| E24410 | Central nipple lubrication system for endless floor and spreading aggregate (17 / 18 lubrication points) |
| E24510 | Electrical central lubrication for all lubrication points on the chassis and body, without rotating joints, automat. lubrication of the roller chain on the spreading aggregate |
Global sales
SUPPORT WITH ALL ISSUES RELATING TO ORDERS AND DELIVERIES ABROAD
Always in TEBBE’s good hands: from the initial contact through to punctual delivery. Our experts will tell you everything you need to know about global orders for our products. We look forward to hearing from you.