TRIDEM SPREADER KS 340
The immense power oft he KS 340 enables largest application rates per day. The machine is designed for intensive use.The conical loading space makes emptying easier when the dosing slider is open.
- Hydraulic suspension, with levelling valve
- BPW axles / first and third axle hydraulically forced steered, first axle as a lifting axle
- Hydraulic suspension and height-adjustable hitch drawbar with K 80
- Chassis as an interchange system, locked with container locks
- Without container locks in combination with item 20072
- 10-t jack stand with 2-step gearbox, support foot can be adjusted separately
- LED lights pursuant to German road traffic regulations (StVZO), light system 12 V, connecting cable, socket
- 6-wheel air brake with ALB controller, tristop cylinder as a parking brake
- Body as an interchange system, locked with container locks
- Steel side walls 3 mm thick, 1,400 mm high, smooth on the inside, welded on the outside
- Grille and rubber sealing in the front wall
- Hydraulically-actuated, swivel-mounted rear hood
Two conveyors with four round steel chains 14 x 50 mm (breaking load 4 x 24 t) - Steel floor
- Gearbox with hydr. motor for forward and reverse of scraper floor
- Slurry gate, opening 1,600 mm, slurry gate display on the front wall
- Two beater rotors with an outer diameter of 650 mm. Spreader aggregate passage 1,500 mm
- Cardanic drive of the beater rotors , version 1 3/4” / Ø 45 mms
- 2-disc spreader with a disc diameter 1,000 mm / 4 distribution vanes on each
- Disc gearing with shaft Ø 60 mm / overload protection / freewheel drive mechanism, spreading unit protected by 8 mm thick HARDOX wear plates
- Walterscheid drive shaft PWE 580 with cam clutch and freewheel drive mechanism to protect the powertrain and beater rollers
- Overload clutch to protect the disc spreading aggregate
- Freewheels between the spreading plate gearboxes
- If equipped with electrical control system: Speed monitoring of the beater rotors. The bottom chain is stopped when rotor beater speed is < 140 rpm.
| Article no. | Article |
|---|---|
| E20015 | Hydraulic jack |
| E54510 | Parking supports 4 x |
| E20066 | Axles prepared for tire pressure regulation system |
| E20072 | Electrical weighing system with 6 load cells |
| E21029 | Tires 710 / 50 R 26.5 Nokian Country King |
| E21156 | Tires 710 / 50 R 26.5 Michelin TrailXBib VF |
| E21031 | Tires 750 / 45 R 26.5 Alliance 389+ VF |
| E21038 | Tires 710 / 50 R 30.5 Michelin TrailXBib VF |
| E21056 | Tires 750 / 60 R 30.5 Michelin TrailXBib VF |
| E21041 | Tires 850 / 50 R 30.5 Michelin TrailXBib VF (width 3100 mm) |
| Article no. | Article |
|---|---|
| E22162 | Extension on side walls, steel, 500 mm |
| E22036 | Bottom chain as cubic chain type 125 HV |
| E22310 | Spreading aggregate with 3 rotors, opening area vertical 1,900 mm, rotors with diameter 550 mm |
| E22032 | Rubber sealing at slurry gate |
| E22031 | Spreading cover, hydraulic, on left side |
| E22035 | Spreading cover, hydraulic, on right side |
| E22070 | Working light LED, each |
| E22040 | Plastic ledge on top of side walls |
| E22050 | Plastic sheet inside of rear hood |
| E24208 | Position light red/white rear |
| E24209 | Position light red/white front |
| E24207 | Warning beacon yellow |
| E24206 | Sidelights yellow |
| E24250 | Double lighting system at the back |
| Article no. | Article |
|---|---|
| E24040 | Electrical operation for hydraulic spreading cover |
| E24100 | Working hour meter for electrical operation |
| E24105 | Job control box incl. cable set |
| E24130 | ISO BUS Terminal Touch 800 |
| E24140 | ISO BUS Terminal Touch 1200 |
| E24108 | CAN-BUS module for weighing system (necessary for combination of E20072 + E24105) |
| E24120 | Gate cylinder with sensor for digital opening |
| E24410 | Central lubricator nipple for 17 / 18 greasing points of body |
| E24540 | Electrical lubrication system for all greasing points, (without rotating angle joints) |
Global sales
Support with all issues relating to orders
and deliveries abroad
Always in TEBBE’s good hands: from the initial contact through to punctual delivery.
Our experts will tell you everything you need to know about global orders for our products.
We look forward to hearing from you.