FOUR-AXLE SPREADER HS 420

With a useful loading volume of 34 cbm, the four-axle spreader HS 420 is by far the largest spreader in the TEBBE program. Extremely efficient, optimised chopping and an impressive throughput make it the spreader of choice on large international fields.

Contact

TEBBE HS 420 Streuer

Technical Data

Total weight34,000 kg
Useful load22,000 kg
Support load4,000 kg
Bridge size8,800 mm x 2,300 mm
Box dimensions7,500 mm x 2,210 mm
Height of side walls1.400 mm
Usable load capacity, approx.25 cbm
Loading height in basic version, approx.3.000 mm
Axle10-hole wheel connection
Tires710/50 R 26.5
  • Hydraulic suspension, with levelling valve
  • Four-axle chassis with BPW axles, first and fourth axle with hydraulically forced steering, third axle with trailed steering system, first axle with hydraulic lifting system
  • Hydraulic suspension and height-adjustable hitch drawbar with K 80
  • Chassis as interchange system
  • 10-t jack stand with 2-step gearbox, support foot can be adjusted separately
  • LED lights pursuant to German road traffic regulations (StVZO), light system 12 V, connecting cable, socket
  • 8-wheel air brake with ALB controller, tristop cylinder as a parking brake
  • Body as an interchange system, locked with container locks
  • Steel side walls 3 mm thick, 1,400 mm high, smooth on the inside, welded on the outside,
  • Grille and rubber sealing in the front wall
  • Hydraulically-actuated, swivel-mounted rear hood
  • Two conveyors with four round steel chains 14 x 50 mm (breaking load 4 x 24 t)
  • Steel floor
  • Gearbox with hydr. motor for forward and reverse of scraper floor
  • Slurry gate, opening 1,500 mm, slurry gate display on the front wall
  • Two beater rotors with an outer diameter of 650 mm. Spreader aggregate passage 1,500 mm
  • Duplex chain to drove the lower beater rollers
  • 2-disc spreader with a disc diameter 1,000 mm / 4 distribution vanes on each
  • Disc gearing with shaft Ø 60 mm / overload protection / freewheel drive mechanism, spreading unit protected by 8 mm thick HARDOX wear plates
  • Walterscheid drive shaft PWE 580 with cam clutch and freewheel drive mechanism to protect the powertrain and beater rollers 
  • Overload clutch to protect the disc spreading aggregate
  • Freewheeling between the spreader plate transmissions
  • If equipped with electrical control system: Speed monitoring of the beater rotors. The bottom chain is stopped when beater rotor speed is < 140 rpm.

Special equipment HS 420

Article no.Article
E20015Hydraulic support foot
E545104 x parking supports
E20064BPW axles with borehole for tire pressure regulation system
E20078Electrical weighing device with 8 cells
E21029Tire 710 / 50 R 26.5 Nokian Country King
E21030Tire 710 / 50 R 26.5 Michelin CargoXBib HF
E21031Tire 750 / 45 R 26.5 Alliance 380
E21042Tire 800 / 45 R 26.5 Michelin CargoXBib (outer width 3,050 mm)
E21043Tire 710 / 50 R 30.5 Michelin CargoXBib
E21044Tire 800 / 45 R 30.5 Michelin CargoXBib
Article no.Article
E22101Steel body 500 mm, load volume 45 cbm
E22019Endless floor with 4 die-forged flat link chain type 125
E22300Spreader aggregate with 3 beater rollers, opening 1,900 mm, beater rollers with an outer diameter of 550 mm, gate opening 1.900 mm
E22032Rubber seal on the slurry gate
E22031Spreading cover, hydraulic, on left side
E22035Spreading cover, hydraulic, on right side
E22070LED work lights, per unit
E22041Protective bar for side walls
E22050Protection plate for rear hood
E24203Lighting package: Position lights red / white, side lights yellow, beacon light yellow
E24250Double lighting / in LED on the spreader aggregate
Article no.Article
E24040Additional function for 24020: Electrical operation for spreading cover
E24100Operating hour counter for electrical operation
E24110Load counter
E24105Job calculator with cable harness
E24106ISO BUS terminal
E24108CAN BUS module (if equipped with items 24105 + 20078)
E24120Dosage valve with a sensor for digital opening display
E24400Automatic lubrication of the roller chain on the spreading aggregate 
E24410Central nipple lubrication system for endless floor and spreading aggregate (17 / 18 lubrication points)
E24512Electrical central lubrication for all lubrication points on the chassis and body, without rotating joints, automat. lubrication of the roller chain on the spreading aggregate 

IMPRESSIONS

Black on white

Our information brochure for the HS-spreader
is available here as a download.

This will provide you with an overview of your product.

TEBBE Streuer Prospekt HS-Serie Cover

Dealer Contact

Find a TEBBE dealer near you.

We have our authorized dealer network to accept orders within Germany. Always competent, always close by.

Finding dealers

TEBBE Streuer und Zugmaschine auf Tieflader

Global sales

Support with all issues relating to orders
and deliveries abroad

Always in TEBBE’s good hands: from the initial contact through to punctual delivery.
Our experts will tell you everything you need to know about global orders for our products.
We look forward to hearing from you.

Contact